SikaGrout®-9010

Specialized lubrication mix to ease the installation of SikaGrout®-9000 series

SikaGrout®-9010 is a high-strength cementitious mix that lubricates pump installation equipment, producing a flowable, cohesive mix when mixed with water. Advanced binder technology combines high quality cement and chemical additives, ensuring optimal performance and ease of use.

  • Excellent lubricating properties.
  • Long working time.
  • Final strength similar to SikaGrout®-9000 series of products.
  • Available in special, watertight big bags for large scale application.
  • Can be mixed and used within a large ambient temperature range (0°C to 40°C)
Contact

Usage

SikaGrout®-9010 has been especially formulated for lubricating installation equipment used in large scale, pump applications of the SikaGrout®-9000 series of grouts. Contact the Technical Department of your local Sika office regarding any application required not mentioned here.  

Advantages

  • Excellent lubricating properties.
  • Long working time.
  • Final strength similar to SikaGrout®-9000 series of products.
  • Available in special, watertight big bags for large scale application.
  • Can be mixed and used within a large ambient temperature range (0°C to 40°C)

Packaging

SikaGrout®-9010 is supplied in special 25 kg bags and 200 kg watertight big bags

Product Details

Product Information

Shelf life

6 months from date of production for 25 kg bags

12 months from date of production for 200 kg big bags

Storage conditions

Product must be stored in original, unopened and undamaged sealed packaging in dry conditions away from direct sunlight and heat, not exceeding 35 ºC. When stored under high temperature and high humidity conditions, the shelf life may be reduced.

Density

2.23 – 2.29 ton/m3

(EN 12390-7)
Technical Information

Compressive strength

Age

N/mm2

1 day

> 55

7 days

> 80

28 days

> 110

Application

Application Information

Mixing ratio

20 – 22% by mass of powder

0 – 18 oC

20 – 21% by mass of powder

>18 – 40 oC

Material temperature

0 °C min. / +40 °C max.

Ambient air temperature

0 °C min. / +40 °C max.

Substrate temperature

0 °C min. / +40 °C max.

Pot Life

2 hours

Flowability

370 - 430 mm

(ASTM C1437)
Consumption

Consumption

Approximately 560 liters per ton material.
Application steps

NOTES ON INSTALLATION

  • SikaGrout®-9010 has been especially formulated for use in specific applications. As such SikaGrout®-9010 should be installed by experienced fully trained contractors.

  • Sands or other products that could affect the products properties must not be added.

  • SikaGrout®-9010 which will be exposed to strong drying conditions, e.g. mortar which is directly exposed to heavy wind and/or direct sunlight, should be protected using appropriate curing agents.

 

EQUIPMENT

Mixer type

Paddle mixer or high speed impeller mixer

Mixing time

Approximately 3 to 6 minutes

Application method

One continuous pour

CLEANING

Tools and spillages can be cleaned with water while SikaGrout®-9010 is still uncured. Once hardened, the material can only be removed mechanically.